1～14 item / All 14 items
Light-type active sensor DA-1100-24C
■Features ● Can be used for unlocking electric locks. ● Ceiling-mounted light sensor. ● Almost unaffected by indoor wind, sound, and temperature changes. ● Self-diagnostic function to determine abnormalities in the sensor itself. ● High-density area arranged in 4 rows with 6 detection patterns per row.
Sensor for activating the sheet shutter with only necessary functions at a mounting height of 3.2m.
■32 detection spots can be set The sensor has 32 detection spots, which can be cleared by row. ■Stationary object detection time setting Settings of ∞ seconds, 60 seconds, 10 seconds, and 2 seconds are possible. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Area adjustment The depth area setting can be configured via dip switches for 4 rows, 3 rows, 2 rows, or 1 row. The width area setting can be configured for the left and right sides using area masks. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations at the installation point during shutter opening and closing. There are four levels: Normal, Level 1, Level 2, and Level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to configure the sensors to have different settings.
High-altitude installation type (recommended height 3m to 6m) capable of covering large doors, achieving a high-density detection pattern (4 rows/24 beams).
■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it can detect over long distances, making it ideal as a sensor for large factory doors and sheet shutters. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door and people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle With a swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.
This single unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)
■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By using the new insect mode in conjunction with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutterway (negative side) can be established, enhancing safety.
A new ceiling sensor design that does not compromise aesthetics, achieving a flat integration through a pull-down method.
■High-density infrared area The detection area achieves a high-density wide area with 72 spots. ■Adjustable area Both the stepping and wide areas can be erased one row at a time, allowing for optimal fine area adjustments. ■Mode switching function The eco mode function reduces unnecessary opening time of automatic doors. ■Operation confirmation function The use of full-color LEDs makes operation confirmation easy. ■Easy installation The industry's first pull-down method achieves a flat, integrated design that preserves the aesthetics of the ceiling. A flattening of approximately 10mm compared to conventional products has been realized.
New design that reduces protrusion during installation without a target.
■Achieves a maximum installation height of 4m without a target Even with a high door of 4.0m, it can provide a spacious entrance while maintaining safety with the doorway monitoring function. It is also suitable for entrances of industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors during rushing into the entrance or diagonal entry. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with 7-color LED In detection range confirmation mode, the color of the displayed LED changes for each detection row, allowing for area measurement and identification of malfunctioning rows. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density.
Maximum installation height of 3.6m with ECO function. Settings are made via smartphone or tablet.
■72 detection spots can be set The sensor can be configured with 72 detection spots divided into four groups, and one detection spot can be changed to a non-detection area. In the four groups, sensitivity settings, hold time settings, output time settings, and noise environment settings can be configured individually. *Settings are done using a smartphone or tablet. ■Function settings can be done via smartphone Various settings for functions and sensors are performed using Wi-Fi communication on a smartphone or tablet with Android 2.2 or higher installed. (Please download the dedicated app from our website.) This allows for safer operations at heights, as only the installation of the equipment is required. (A separate setting unit DSY is needed for configuration.) ■Eco function Detection is not activated in the horizontal direction, while detection occurs in the direction towards the sensor, and the output time is shortened in the direction away from the sensor, reducing unnecessary openings and closings. ■Output settings Output can switch between contact a and contact b, and in the case of contact b, it operates in fail-safe mode (open during power failure).
The optical area can individually set 72 spots for detection and non-detection.
■72 optical spots can be set You can set detection and non-detection for 72 optical spots on a per-spot basis, allowing for area security settings tailored to the site. Additionally, detection spots can be divided into four groups, each with adjustable sensitivity and output time settings. ■Settings via dedicated software The settings for the main unit are performed by connecting to an optional setting unit DSY (sold separately) and a device such as a smartphone or tablet running Android 2.2 or higher with a dedicated app installed via Wi-Fi. The detection status can be viewed in real-time, ensuring accurate area settings. There is also no need to work at heights. (Please download the dedicated software from our website.) ■Interference prevention function With four interference prevention modes, the same sensor can be installed in close proximity without malfunctioning. ■Environmental settings Environmental settings can be adjusted in four stages, which helps reduce false detections from snow, insects, and other factors.
Slim, unframed sensor focused solely on essential functions.
■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Stationary object detection time setting Settings of 2 seconds, 10 seconds, 60 seconds, and infinite are possible. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Thin design with a sensor thickness of 28.5mm With a thickness of 28.5mm, the likelihood of the sensor coming into contact with the shutter when closing is reduced in environments where electric shutters are used. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations from automatic door opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to set them to have different configurations.
High-performance sensor with doorway monitoring function compatible with installation height of 4m without blind spots.
■Supports installation heights from 2 to 4 meters Equipped with doorway monitoring functionality, it supports installation heights from 2.0 to 4.0 meters. ■Improved detection range adjustment function The width and depth can be finely adjusted for the detection range, allowing for adjustments to the detection area based on the installation environment. ■Industry-leading 60 spots With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. ■Enhanced environmental and insect countermeasures With three levels of "environmental countermeasures" and insect countermeasure functionality, it further strengthens measures against malfunctions caused by snowfall and flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when temperatures predict snowfall, reducing malfunctions caused by snow. *When environmental countermeasures are set, the level of environmental countermeasures automatically increases by one level at low temperatures. ■Status indication with 7-color LED The 7-color LED display allows for confirmation of settings (snow/insect mode) and detection range, making it possible to identify malfunctioning rows. ■User-friendly design ● Equipped with mutual interference prevention functionality to prevent malfunctions caused by interference with adjacent sensors (6 frequencies). ● Includes a self-diagnostic function to assess infrared emission capability.
New design that reduces protrusion during installation without a target.
■Realization of a maximum installation height of 4m without a target Even with high doors of 4.0m, it is possible to achieve an open entrance while maintaining safety with the doorway monitoring function. It can also accommodate entrances of industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors due to rushing into the entrance or diagonal approaches. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with colored LEDs In detection range confirmation mode, the color of the displayed LEDs changes for each detection row, allowing for area measurement and identification of rows experiencing false activations. During monitoring, the presence or absence of snow and insect mode settings can be distinguished by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density. ■Strengthened measures against false activations due to snow Snow mode is divided into three levels, enhancing measures against false activations compared to conventional products and reducing sensitivity decline.
High-performance light beam active sensor ideal for activating sheet shutters up to 4.5m in size.
■Compatible with installation heights of 2 to 4.7m and equipped with shutterway monitoring function The shutterway monitoring function is compatible with installation heights of 2.0 to 4.7m. ■Improved detection range adjustment function It is possible to adjust the detection range for each row in width and depth, allowing for area adjustments tailored to the installation environment. ■Industry-leading 60 spots With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. ■Enhanced environmental and insect countermeasures The "environmental countermeasures" feature has three levels, and the "insect countermeasures" function further strengthens measures against malfunctions caused by snowfall and flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when the temperature reaches a level where snowfall is predicted, reducing malfunctions caused by snow. *If environmental countermeasures are set, the level of environmental countermeasures will automatically increase by one level during low temperatures. ■Status display with 7-color LED The 7-color LED display allows for confirmation of the setting status (environmental countermeasures and insect mode) and detection range confirmation mode, enabling the identification of rows experiencing malfunctions.
This one unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)
■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By combining the new insect mode with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutter way function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutter way can be established, enhancing safety. ■Detection area setting function The depth area can be set from 5 columns to 1 column, and the width area can be independently adjusted left and right, allowing for the deletion of detection areas for the two outer spots, enabling fine area settings tailored to the site.
The automatic door opens when you wave your hand. A touchless feature with a non-contact sensor!
■Equipped with Touchless Function By pinpointing the activation area of the sensor above the automatic door to the door plate, it can simulate the function of a touch switch. When you bring your hand close to the automatic door plate, the sensor detects it and opens the door, allowing you to open the door without contact (touchless). ■Reduce Malfunctions of Automatic Doors with Detailed Detection Area Settings Touchless detection area settings can be configured in four ways: central, left, right, with four spots each, totaling 12 spots. It is compatible with sliding doors and left/right single sliding doors. The door will not open when approached from the side, effectively reducing unnecessary opening and closing of the automatic door. ■Can Also Be Used as a Standard Non-Contact Sensor By switching the dip switch, it can also be used as a conventional non-contact activation sensor. ■Available Cover Colors The cover colors are available in five options: S Silver, B Bronze, W White, BL Black, and ST Stainless Steel.
